Product Descriptions
Multipurpose and Special Greases
Bearings, gears, shafts, linear guides, joints, threaded connections and moving mechanisms in industrial machinery are exposed to friction, mechanical loads, vibration, temperature and environmental influences during operation. Incorrect or insufficient lubrication may lead to wear, heat generation, increased noise and vibration, reduced component life and unplanned machinery downtime.
ACCA multipurpose and special greases are developed to lubricate and protect machine components operating under different conditions. The product range includes multipurpose greases for standard maintenance as well as specialist formulations for mechanical loads, temperature, water exposure, vibration, assembly operations and anti-seize applications.
Greases combine a lubricating oil with a thickener system that helps the product remain at the application point. This characteristic supports a stable and longer-lasting lubricating layer in mechanisms where liquid oils could drain or be displaced from the surface.
Selecting the correct grease helps reduce friction and wear, protect metal surfaces, support consistent equipment operation and improve maintenance planning.
Multipurpose Greases
Multipurpose greases are developed to cover a wide range of standard lubrication requirements in industrial facilities. They can be used for bearings, shafts, joints, mechanical connections and moving components operating under moderate loads.
These products help maintenance teams use a common grease for several applications. However, a suitable specialist grease should be selected where specific temperature, load, speed, water resistance or material compatibility requirements exist.
UNIVERSAL GREASE HD 91 AEROSOL is a multifunctional spray grease for general industrial maintenance. Its aerosol packaging provides controlled application to narrow, local and difficult-to-reach lubrication points.
DELTA GREASE HD 210 is a multifunctional grease for general machinery maintenance. DELTA GREASE HD 210 FILANTE, with its tacky structure, can be considered where stronger surface adhesion is required.
Special Greases
Where standard greases are not sufficient, formulations containing specialist additives and different thickener systems may be required. ACCA special greases provide alternatives for demanding operating conditions, mechanical loads, anti-seize assembly, temperature exposure and specific surface requirements.
BISOLF GREASE HD 21
A specialist grease containing molybdenum disulfide. It helps reduce friction and wear between metal surfaces and can be considered for gears, bearings, pins, joints and moving components operating under mechanical load.
BISOLF GREASE HD 21 AEROSOL provides convenient application to local and difficult-to-reach lubrication points.
ALUGREASE HD 85
An aluminium-based anti-seize assembly grease. It can be used on threaded connections, bolts, flanges and metal components that may need to be dismantled during future maintenance. It helps limit seizure and bonding between metal components.
ALUGREASE HD 85 AEROSOL provides controlled application during local assembly and maintenance operations.
CU-GREASE HD 43
A copper-based specialist anti-seize grease. It can be used on threaded connections, nuts and bolts, flanges and metal assembly points operating under demanding conditions. It helps facilitate future disassembly and limits adhesion between metal surfaces.
The spray version enables controlled application to assembly areas.
BENT GREASE HD 33
A colourless, non-melting specialist grease that can be considered for applications where colour transfer is undesirable. Suitability should be evaluated according to the operating conditions and equipment manufacturer's requirements.
PTFE Greases
PTFE-containing greases can be used in precision mechanisms requiring low friction and clean lubrication. **GREASE FLON HD 20 BIANCO** is a white PTFE grease. **SINT GREASE PTFE HD 214** is a synthetic PTFE-based specialist grease that can be considered for precision applications requiring durable lubrication.
SILICON GREASE HD 45/A
A silicone-based specialist grease suitable for selected elastomers, seals, valves and specialised mechanical applications. Where silicone may affect subsequent painting, printing, bonding or coating operations, compatibility should be evaluated carefully before use.
Main Advantages
* Helps reduce friction and mechanical wear.
* Forms a stable lubricating layer on moving components.
* Suitable for bearings, gears, shafts, pins and joints.
* Provides solutions for general maintenance and specialist operating conditions.
* Helps the lubricant remain at the application point.
* Includes multipurpose, tacky, PTFE, silicone and molybdenum disulfide alternatives.
* Copper- and aluminium-based assembly greases help reduce seizure.
* Aerosol alternatives enable application to narrow and difficult-to-reach areas.
* Contributes to component protection and extended service life.
* Supports systematic preventive maintenance programs.
Application Areas
ACCA multipurpose and special greases can be used for:
* Plastic injection molding machines
* Extrusion and compounding lines
* Rubber-processing machinery
* Blow molding machines and auxiliary equipment
* Bearings and bearing assemblies
* Open and enclosed gear mechanisms
* Shafts, pins and joints
* Lead screws and moving connections
* Linear guides and guide systems
* Chains and drive mechanisms
* Bolts, nuts and threaded connections
* Flanges and assembly points
* Maintenance workshops
* General industrial machinery maintenance
* Anti-seize assembly applications
* Precision and specialist lubrication points
Selecting the Correct Grease
Grease selection should be based on the complete operating conditions rather than only the general application. The principal selection criteria include:
* Operating temperature
* Mechanical load and shock
* Movement speed
* Bearing or mechanism type
* Contact with water, moisture, dust or chemicals
* Relubrication interval
* Application method
* Compatibility with plastics, rubber and elastomers
* Existing grease and thickener type
* Possibility of incidental food contact
* Subsequent painting, printing or bonding operations
Greases with different chemical bases or thickener systems may be incompatible with each other. When changing products, the existing grease should be removed as completely as possible and compatibility should be verified before applying the new product.
Only products with verified suitability and current certification should be used where incidental food contact is possible. For these applications, **ALIFOOD GREASE HD 91** and its aerosol version may be considered after reviewing the relevant technical and certification documents.
Application Information
Before applying grease, the lubrication point should be cleaned of old grease, dirt, dust and other contaminants. The correct quantity should be applied according to the mechanism's requirements. Excessive greasing should be avoided because it may increase heat generation, resistance and contamination.
Aerosol greases should be prepared according to the product instructions and applied only to the required area. Before maintenance, the machine must be stopped, energy sources safely isolated and moving components secured.
Unintended contact between the grease and mold cavities, raw materials or manufactured plastic and rubber components should be prevented. A compatibility test is recommended where contact with plastics, elastomers, seals, painted or coated surfaces is possible.
Application quantity, relubrication interval and operating conditions should follow the product's technical data sheet, safety data sheet and the equipment manufacturer's maintenance instructions.
Featured Products
UNIVERSAL GREASE HD 91 AEROSOL:** Multifunctional spray grease for general maintenance.
DELTA GREASE HD 210:** Multipurpose industrial grease.
DELTA GREASE HD 210 FILANTE:** Tacky multipurpose grease providing strong surface adhesion.
BISOLF GREASE HD 21:** Specialist grease containing molybdenum disulfide.
BISOLF GREASE HD 21 AEROSOL:** Molybdenum disulfide spray grease for local applications.
ALUGREASE HD 85:** Aluminium-based anti-seize assembly grease.
ALUGREASE HD 85 AEROSOL:** Aluminium-based spray grease for controlled application.
CU-GREASE HD 43:** Copper-based anti-seize grease.
CU-GREASE HD 43 SPRAY:** Copper spray grease for threaded connections and assembly points.
BENT GREASE HD 33:** Colourless, non-melting specialist grease.
GREASE FLON HD 20 BIANCO:** White PTFE grease.
SINT GREASE PTFE HD 214:** Synthetic PTFE-based specialist grease.
SILICON GREASE HD 45/A:** Silicone-based specialist grease.
ALIFOOD GREASE HD 91:** Specialist grease for suitable applications involving a risk of incidental food contact.
