Polmak Plastik

GNEUSS – Polymer Filtration and Recycling

GNEUSS – Polymer Filtration and Recycling

GNEUSS – Polymer Filtration and Recycling

GNEUSS – Polymer Filtration and Recycling
GNEUSS – Polymer Filtration and Recycling
Gneuss, Gneuss Türkiye, eriyik filtrasyon sistemi, polimer filtrasyonu, RSFgenius, SFXmagnus, SFneos, MRS ekstrüder, MRSpure, MDS ekstrüder, OMNI geri dönüşüm, OMNImax, OMNIboost, PET geri dönüşüm, rPET ekstrüzyon, plastik geri dönüşüm hattı, JUMP polireaktör, online viskozimetre, Polmak Plastik
GNEUSS - Polymer Melt Filtration, Extrusion and Plastic Recycling Technologies

 

GNEUSS - Polymer Melt Filtration, Extrusion and Plastic Recycling Technologies

German Engineering for High-Efficiency Polymer Processing and Recycling Solutions

Based in Germany, Gneuss Kunststofftechnik GmbH is an international technology manufacturer specializing in advanced polymer melt filtration systems, extrusion technologies, recycling lines and process control equipment for the plastics processing and recycling industries.

Gneuss is particularly recognized for its patented Rotary Filtration Systems, MRS (Multi Rotation System) extrusion technology and advanced polymer devolatilization solutions.

The company's technologies are designed to ensure process stability, improve melt quality, optimize energy consumption and increase production efficiency in polymer processing and recycling applications.

Gneuss offers a comprehensive product portfolio covering continuous melt filtration, high-performance extrusion systems, PET and other thermoplastic recycling technologies, viscosity measurement and complete production lines.

As the representative of Gneuss in Türkiye, Polmak Plastik supports customers in the plastics processing and recycling industries with equipment selection, technical evaluation, project development and after-sales service coordination.

 

GNEUSS Products and Technologies

1. Polymer Melt Filtration Systems

Gneuss is internationally recognized for its patented rotary melt filtration systems developed for plastics processing and recycling applications.

These systems remove solid contaminants and unwanted particles from polymer melts, helping manufacturers maintain consistent product quality.

Unlike conventional screen changers, Gneuss Rotary Filtration Systems are designed to provide continuous filtration with minimal process fluctuations during screen changes.

 

Main filtration systems:

RSFgenius - Fully Automatic Self-Cleaning Filtration

The RSFgenius is a continuously operating rotary melt filtration system equipped with integrated backflush technology.

It is particularly suitable for recycling materials with high contamination levels and for demanding applications requiring fine melt filtration.

Its automatic screen cleaning and reuse functionality is designed to reduce filter consumption and operator intervention.

 

SFXmagnus - Continuous and Stable Melt Filtration

The SFXmagnus is a rotary melt filtration system combining a large active filtration area with a compact design.

It is developed for extrusion applications requiring continuous filtration, stable melt pressure and consistent product quality.

 

SFneos - Precision Polymer Filtration

The SFneos filtration system is designed for processing thermally sensitive polymers and applications with specific rheological requirements.

Its advanced filtration technology enables stable processing conditions and continuous production with minimal disturbances.

Gneuss filtration systems are used in the production of films, sheets, fibers, pellets, pipes and various polymer products.

 

2. MRS - Multi Rotation System Extrusion Technology

Gneuss' patented MRS extrusion technology has been developed for highly efficient polymer melt devolatilization and decontamination.

The multi-rotation screw arrangement used in MRS extruders significantly increases the surface area of the polymer melt exposed to vacuum.

This design facilitates the removal of moisture, volatile substances and undesirable components from the polymer melt.

 

Key advantages of MRS technology:

Highly efficient devolatilization and decontamination

Reduced or eliminated pre-drying requirements in suitable PET applications

Efficient processing of recycled polymer materials

Optimized energy consumption

Improved melt quality and process stability

Flexible processing of feedstocks with varying properties

MRS technology is widely used in PET sheet, packaging, fiber and recycling applications.

 

3. MRSpure and MDS Extrusion Systems

In addition to MRS technology, Gneuss offers MRSpure and MDS extrusion systems for processing different polymers and recycled materials.

 

MRSpure Extruder

The MRSpure extruder is designed for demanding devolatilization and decontamination applications. It is particularly suitable for cleaning recycled polymers, reducing volatile substances and supporting odor reduction processes.

 

MDS - Multi Dimension System Extruder

The MDS extrusion system provides specialized devolatilization capabilities for removing moisture and volatile components from polymer melts.

It is designed to improve process stability and enhance material quality in demanding polymer processing and recycling applications.

Both technologies can be configured according to polymer type, feedstock characteristics and target product quality.

 

4. OMNI Plastic Recycling Systems

Gneuss OMNI recycling systems are developed for converting industrial and post-consumer plastic waste into high-quality recycled materials or finished products.

These systems integrate material feeding, extrusion, vacuum devolatilization, melt filtration and process control technologies into coordinated production solutions.

 

OMNI - Plastic Recycling Lines

The OMNI series offers flexible recycling solutions for processing industrial and post-consumer waste from different polymer materials.

 

OMNImax - Advanced Cleaning and Decontamination

OMNImax is designed for demanding recycling applications involving intensive devolatilization, decontamination, odor reduction, filtration and melt homogenization.

It can be used in recycling projects involving thermoplastics such as PE, PP, PS, PET, PA and PLA.

 

OMNIboost - High-IV PET Recycling

OMNIboost is specifically developed for PET recycling applications where an increase in intrinsic viscosity (IV) is required.

The system can integrate the JUMP polyreactor to support the conversion of PET bottles and polyester waste into high-quality recycled products.

 

5. JUMP - PET Viscosity Enhancement Technology

The Gneuss JUMP polyreactor is an advanced polycondensation system designed to increase the intrinsic viscosity of PET melts under controlled processing conditions.

Operating under vacuum, the system is developed to improve polymer properties and achieve the IV values required for specific applications.

 

Typical applications include:

PET bottle-to-bottle recycling

PET sheet and thermoforming packaging

Recycling of polyester fiber waste

PET applications requiring higher intrinsic viscosity

 

6. Online Viscosity Measurement and Process Control

Gneuss supplies advanced measurement and control technologies that support quality assurance in extrusion and recycling processes.

VIS - Online Viscometer

The VIS online viscometer continuously measures and monitors polymer melt viscosity during production.

This technology enables manufacturers to identify variations in feedstock quality and monitor the effects of processing conditions on melt properties.

Online viscosity measurement is particularly valuable for PET recycling applications and other polymer processes requiring consistent viscosity.

Gneuss also develops melt pressure and temperature sensors and process control technologies for reliable extrusion monitoring.

 

7. Complete Extrusion and Recycling Lines

In addition to individual process components, Gneuss supplies complete extrusion and recycling systems.

Main applications include:

PET and rPET sheet production

Thermoforming packaging sheets

PET strapping tape production

PET pellet production

Bottle-to-bottle PET recycling

Polyester fiber recycling

Industrial and post-consumer plastic waste recycling

Production lines are engineered according to feedstock characteristics, target throughput, product specifications and investment requirements.

 

Technological Advantages of GNEUSS Systems

Continuous and Stable Production

Rotary Filtration Systems help minimize pressure fluctuations during screen changes, supporting consistent extrusion processes.

 

High-Quality Recycling

Advanced extrusion, decontamination and filtration technologies support the production of high-quality materials from recycled feedstocks.

 

Energy and Process Efficiency

Technologies such as MRS and MDS can reduce additional drying and processing requirements in suitable applications, contributing to improved energy efficiency.

 

Feedstock Flexibility

Polymer waste and recycled materials from different sources can be processed using application-specific system configurations.

 

Precise Quality Control

Online viscosity measurement and advanced process control technologies enable continuous monitoring of product quality and process conditions.

 

Modular System Integration

Gneuss technologies can be integrated into new production lines or used to upgrade existing extrusion and recycling facilities.


Industries and Applications

Gneuss technologies are used in a wide range of polymer processing industries.

Plastic Recycling: Recovery and reprocessing of PET, PE, PP, PS and other thermoplastics

Packaging: PET and rPET sheet, thermoforming packaging and food packaging applications

Film and Sheet Extrusion: Continuous melt filtration and consistent product quality

Fiber and Textile Production: Processing and recycling of polyester fibers and other polymers

Pellet Production: Manufacturing recycled polymer pellets

Polymer Manufacturing: Melt filtration, viscosity monitoring and process optimization

For food-contact applications, regulatory suitability depends on the feedstock, processing configuration and applicable approvals.

 

GNEUSS in Türkiye - Polmak Plastik

As the representative of Gneuss Kunststofftechnik in Türkiye, Polmak Plastik provides technical consulting and project development support to manufacturers in the plastics processing and recycling industries.

In addition to new production investments, Polmak Plastik supports technical evaluations for upgrading existing extrusion lines, replacing melt filtration equipment and improving recycling processes.

 

Our main services for Gneuss technologies include:

Selection of polymer melt filtration systems

Technical evaluation of RSFgenius, SFXmagnus and other filtration technologies

Assessment of MRS, MRSpure and MDS extrusion systems

Evaluation of PET and other polymer recycling projects

Technical and commercial quotations for OMNI recycling lines

Assessment of production capacities and feedstock characteristics

Equipment integration into existing extrusion lines

Online viscosity measurement and process control solutions

Coordination of spare parts and technical service requests

Technical communication and project follow-up with the manufacturer

 

Request a Quotation for GNEUSS Filtration, Extrusion and Recycling Systems

If you are planning a new extrusion or recycling investment, looking to improve melt filtration in an existing production line or aiming to optimize your processing efficiency, please contact Polmak Plastik.

Based on the polymer type, feedstock characteristics, contamination level, existing extrusion equipment and target production capacity, we can help you evaluate suitable Gneuss technologies for your project.

 

Contact Polmak Plastik for Technical Information and Quotations on GNEUSS Technologies.

 

Other Representation