
UNIPACK Increases Productivity and Reduces Energy Consumption with Gneuss OMNI Technology
UNIPACK Increases Productivity and Reduces Energy Consumption with Gneuss OMNI Technology
Czech packaging manufacturer UNIPACK has successfully modernized its PET strapping production line with a Gneuss OMNI extrusion system, achieving higher productivity, improved process stability and a reduction in production waste from 7% to 3%.
Modernizing PET Strapping Production with Gneuss OMNI
UNIPACK, a Czech manufacturer of polypropylene (PP) and polyester (PET) strapping tapes, has upgraded its PET strapping production line by replacing an older extruder with a Gneuss OMNI extrusion system.
Operating successfully since the beginning of 2026, the new installation delivers increased production output, significantly improved process stability and noticeable energy savings.
The integrated Gneuss system consists of:
4-component dosing system
Gneuss MRS 90 extruder
25 mbar vacuum unit
RSFgenius continuous melt filtration system
VIS online viscometer
Melt pump
Strapping extrusion die
This integrated configuration enables reliable processing of recycled PET materials while maintaining consistent production quality.
Eliminating the Need for Drying and Crystallization
One of the key advantages of Gneuss OMNI technology is the ability to process PET materials without conventional pre-drying and crystallization.
These preparation processes typically require residence times of 5-6 hours in conventional systems.
By eliminating these energy-intensive preparation steps, Gneuss MRS extrusion technology helps manufacturers reduce operating costs, lower energy consumption and simplify material handling.
The integrated VIS online viscometer continuously monitors the viscosity of the PET melt, providing valuable information for process control.
Meanwhile, the RSFgenius melt filtration system efficiently removes contaminants from recycled materials, helping prevent unnecessary production interruptions and significantly reducing strap breaks.
Production Waste Reduced from 7% to 3%
According to UNIPACK Project Manager Dušan Rejthar, the new Gneuss technology has eliminated the need for expensive material preparation, enabled continuous viscosity monitoring and delivered stable production through highly effective melt filtration.
Following the modernization, production output increased while the waste rate decreased from 7% to 3%.
This represents a reduction of approximately 57% in the waste rate.
The improvements extend beyond productivity. The mechanical properties of the finished strapping tapes, particularly elongation and tensile performance, have also improved significantly.
Positive feedback from end customers confirms the enhanced and consistent quality of the finished products.
Processing Up to 100% Recycled PET
UNIPACK primarily processes colored PET bottle flakes, including green, red and brown materials.
These materials are often unsuitable for conventional bottle-to-bottle recycling applications due to their color characteristics.
With the Gneuss OMNI extrusion system, these recycled PET streams can be converted into high-quality industrial strapping products.
The system enables the use of up to 100% recycled PET material.
This approach allows manufacturers to transform lower-value recycling streams into high-performance packaging products, contributing to more efficient material utilization and a circular economy.
Higher Efficiency and More Sustainable PET Processing
The UNIPACK installation demonstrates how upgrading existing extrusion lines with advanced technologies can deliver measurable improvements in productivity, product quality and operating efficiency.
Gneuss OMNI combines high-performance extrusion, efficient degassing, continuous melt filtration and online viscosity monitoring in one integrated system.
This enables manufacturers to reduce energy consumption and production waste while increasing the use of recycled polymers.
Gneuss Technologies in Türkiye - Polmak Plastik
As the representative of Gneuss in Türkiye, Polmak Plastik provides technical and commercial support for plastics recycling, extrusion, melt filtration and production line modernization projects.
For more information about Gneuss solutions for PET strapping, PET sheet, polyester fiber and other recycling applications, please contact Polmak Plastik.
NEWS ARCHIVE